-
Used Stock Motors
$5,000.00All Used Stock Motors are complete and sold as is. Shipping is not included in price and is calculated separately. We will contact you after purchase to find best and most cost effective way of shipping to your location Price dependent on mileage and condition. Call for exact pricing.RZR Big Bearing Hub and Spindle Kit
$3,195.00 – $3,275.00Groundbreaking RZR Big Bearing Hub and Spindle Kit is nearly 8 lbs. lighter per corner than stock. Incorporates a 30% larger wheel bearing at a massive 90 mm versus the stock 78 mm. The bearing I.D. is increased from 34 mm t0 44 mm. This larger I.D. gives the hub more support in the bearing which controls the large 30"-34" tires. The spindle has a double shear steering arm which will accecpt a 5/8" or 3/4" heim joint. The hubs are available in 7075 billet aluminum, and have a huge 270 mm chromoly rotor with 4 ARP wheel studs. The spindles have a stainless steel brake caliper adapter that utilizes the stock Polaris caliper bracket to accommodate the large rotor. The billet aluminum rear uprights that bolt to the swing-arms also incorporate the large bearing and are pocketed out to except 5/8" or 3/4" heims on the end of the radius rods. Comes with all necessary hardware.Pace Offroad Z1 Motor Mount Kit
$2,699.00This Kit will mount the Z1 motor to either the XP 1000 or 900 Non-Turbo Transmission. Bolts to the stock Polaris OEM mounts. Kit Comes Complete with 4 Motor Mounts and all necessary hardware for mounting.STM Rage 8 Engine Clutch
$2,000.00Wild Cat Z1 Wiring Harness
$1,845.00 – $1,945.00*Requires the purchase of Pace Offroad Power Steering ModuleRZR Z1 Wiring Harness
$1,845.00 – $1,945.00- Sale!
Wild Cat Complete Upper and Lower A-Arm Kit
$1,898.00$1,694.00Wild Cat Complete Upper and Lower A-Arm Kit comes with 2 Upper and 2 Lower A-Arms, Installed ball joints and Bushings. Chromoly. Powder coated Black.Pace Offroad RZR Race Seat and Base Kit
$1,233.00This Kit combines the Sparco RZR Evo 11 Race Seat with our Pace Offroad Aluminum Seat Base. Made to fit Polaris RZR XP 1000 2014-present. Works with both Turbo and Non-Turbo vehicles. No cutting or grinding necessary to install. Uses OEM seat base latch. Sparco has re-engineered seat it's proportions, which result in a seat that is both taller and slightly wider than than average for taller drivers. The seat belt slots are also re-positioned to sit more level with the driver’s shoulders. Able accommodate a Hans device.Used – RZR XP-900 STM Clutch
$1,200.00Used XP 900 Razor STM Clutch. Does not include Shim Kit or Weights. Sold As Is.- Sale!
Wild Cat Lower A-Arm Kit
$1,199.00$1,125.00Wild Cat Lower A-Arm Kit comes complete with installed ball joints and bushings. Chromoly. Powder coated Black.STM Driven Clutch
$1,050.00Wild Cat High Clearance Rear Radius Rod Kit
$999.00Wild Cat High Clearance Rear Radius Rod Kit comes complete with 4-1" rods, 2-1 1/4" rods, and installed bushings. Chromoly. Powder coated Black.RZR Sparco Evo II US Race Seats
$749.00The RZR Sparco Evo II US Race Seat incorporates a unique shell shape and fiberglass construction that increase rigidity without adding weight. Sparco has re-engineered seat it's proportions, which result in a seat that is both taller and slightly wider than than average for taller drivers. The seat belt slots are also re-positioned to sit more level with the driver’s shoulders. Able accommodate a Hans device.RZR Intercooler
$735.00Pace Offroad Intercooler for the Polaris Razor. 7 3/4" x 3" x 25" Long 2" Tubes are 22" from center to center with a 15° angleRZR Power Steering Module
$685.00Pace Offroad Razor Power Steering Module will operate the power steering regardless of engine placed in your vehicle. Stand alone mini ECU that needs a 12V power supply to operate the power steering. Incorporates an adjustable correction for the speedometer to the RZR dash in a Z1 Motor. Will operate power steering whether you install an apex engine or any type motorcycle engine.Wild Cat Power Steering Module
$685.00Pace Offroad Wild Cat Power Steering Module will operate the power steering regardless of the engine placed in your vehicle. Stand alone mini ECU that only needs a 12V power supply to operate the power steering. Incorporates an adjustable correction for the speedometer to the Z1 dash in a Z1 motor. Will also operate power steering in either an apex engine or any type of motor cycle engine.- Sale!
Wild Cat Upper A-Arm Kit
$699.00$669.00Wild Cat Upper A-Arm Kit comes complete with installed ball joints and bushings. Chromoly. Powder coated Black.- Sale!
Wild Cat Straight Rear Radius Rods
$599.00$550.00Wild Cat Straight Rear Radius Rod Kit comes complete with 4-1" rods, 2-1 1/4" rods, and installed bushings. Chromoly. Powder Coated.Wild Cat Steering Cable Delete Kit
$545.00Pace Offroad Steering Cable Delete Kit for the Wild Cat replaces the stock steering cable which can cause drag and inconsistency in the steering input affecting the power steering, and overall steering performance. Made with high-quality U joints and chromoly tubing. The stock steering wheel can be used with this kit or power steering hub to allow for aftermarket wheel. This kit may need slight modification to fit. Available options for standard vehicles or those with an under hood winch kit.RZR High Clearance Rear Radius Rod Kit
$499.00Razor High Clearance Rear Radius Rod Rods are made from tig welded chromoly. Kit comes complete with 5/8" chromoly heim joint, installed billet aluminum bushings, and adapter bushings. Kit comes preset to stock length. Powder coated Red or Black.RZR Sway Bar
$485.00Pace Offroad 1 1/4" Razor Sway Bar and Energy Suspension Bushings replace the stock sway bar. Available in 1 1/4". Powder Coated Black.Used-Wild Cat Billet Aluminum Wheel Centers (4)
$350.00Set of 4 Billet Aluminum Centers come with Center Caps. Have approximately 150 Miles of use. Good Condition. Sold as is.Wild Cat Sway Bar
$325.00Pace Offroad Wild Cat Sway bar and energy suspension bushings replace the stock Wild Cat sway bar. Available in 1 3/8" diameter. Powder coated Black.Arctic Cat Trail/Sport Sway Bar
$305.00Pace Offroad Arctic Cat Trail/Sport Sway Bar replaces the stock Arctic Cat Sway Bar. Chromoly. Powder coated Black.RZR Tie Rod Kit
$299.00Razor XP 1000 Tie Rod Kit comes with scalloped aluminum tie rod tubes and all necessary hardware to replace the stock tie rods. Very light weight and extremely strong. Available in Bare or powder coated Black.RZR Z1 Water Pump Housing Kit
$289.00This Pace designed Z1 Water Pump Housing Kit is machined from Billet Aluminum. It not only increases flow by 20%, but eliminates the 150° elbow in the hose which can trap air and causes cavitation. We have seen a huge improvement in cooling on our cars, and have made this a standard on all of our Z1 swaps. This kit comes complete with everything needed to install.Wild Cat Tie Rod Kit
$279.00Wild Cat Tie Rod Kit comes with scalloped aluminum tie rod tubes and all necessary hardware to replace the stock tie rods. Very lightweight and extremely strong. Available in Bare or powder coated Black.Wild Cat Upper Trailing Arms Kit
$260.00Wild Cat Upper Trailing Arms Kit replaces the stock Arctic Cat Upper Trailing Arms. Chromoly. Powder coated Black or Green.RZR Sparco Evo 11 Race Seat Base
$249.00Lightweight Aluminum Seat Base works with the Sparco Evo 11 and Evo 11 US Race Seats. Made to fit Polaris RZR XP 1000 2014-present. Works with both Turbo and Non-Turbo vehicles. No cutting or grinding necessary to install. Reuses OEM seat base latch, see product description.RZR Billet Intercooler Mount Kit
$245.00Pace Offroad Billet Intercooler Mount Kit mounts the Pace Offroad Razor Intercooler to the roll cage bar. Inside measurement of 8 3/4" with 2 1/4" to the center of the bar. Fits a 1 1/2" Bar. Kit contains 2 mounts. Anodized Black.Pace Offroad Z1Turbo Inlet Bell
$238.00Z1 Turbo Inlet Bell for the Z1 stock Turbo. Venchuri style design makes a smooth transition from a 2 1/2" diameter to the old sized 1 7/8" diameter turbo inlet. Incorporates an internal O-ring and pinch clamp that fasten to the turbo inlet. We see from 6-10 hp improvement. Billet Aluminum. Anodized Red.Wild Cat Wheel Adapter Kit
$225.00The Wild Cat Wheel Adapter Kit adapts the Wild Cat wheel bolt pattern to the Polaris bolt pattern so that aftermarket Polaris wheel centers can be used. Kit is complete with all necessary hardware. Kit Includes 2 Billet Aluminum Wheel Adapters.Yamaha Wheel Adapter Kit
$225.00The Yamaha Wheel Adapter Kit adapts the Yamaha wheel bolt pattern to the Polaris bolt pattern so that aftermarket Polaris wheel centers can be used. Kit is complete with all necessary hardware. Kit Includes 2 Billet Aluminum Wheel Adapters.RZR XP 1000 SKF Transmission Bearing Upgrade Kit
$219.00Polaris Razor XP 1000 SKF Transmission Bearing Upgrade Kit replaces OEM Bearings in stock transmission. Genuine SKF Bearings. Please Select Correct Year. Add our RZR XP 1000 Seal Kit and our Heavy Duty Transmission Bearing Retainer to complete your rebuild. Please supply Transmission Model # from the side of your transmission in the "Order Notes" section at checkout. RZR XP 1000 Transmission Seal Upgrade Kit Heavy Duty Transmission Bearing RetainerRZR 900 SKF Transmission Bearing Upgrade Kit
$219.00Polaris RZR 900 SKF Transmission Bearing Upgrade Kit replaces OEM Bearings in stock transmission. Genuine SKF Bearings. Comes complete with all 12 bearings. Add our RZR 900 Transmission Seal Kit and Heavy Duty Transmission Bearing Retainer to complete your build. RZR 900 Transmission Seal Upgrade Kit Heavy Duty Transmission Bearing RetainerZ1 ARP Head Stud Kit
$199.00
-
Used Stock Motors
$5,000.00All Used Stock Motors are complete and sold as is. Shipping is not included in price and is calculated separately. We will contact you after purchase to find best and most cost effective way of shipping to your location Price dependent on mileage and condition. Call for exact pricing.