-
RZR XP 1000 SKF Transmission Bearing Upgrade Kit
$219.00Polaris Razor XP 1000 SKF Transmission Bearing Upgrade Kit replaces OEM Bearings in stock transmission. Genuine SKF Bearings. Please Select Correct Year. Add our RZR XP 1000 Seal Kit and our Heavy Duty Transmission Bearing Retainer to complete your rebuild. Please supply Transmission Model # from the side of your transmission in the "Order Notes" section at checkout. RZR XP 1000 Transmission Seal Upgrade Kit Heavy Duty Transmission Bearing RetainerPace Offroad Z1 Engine Oil Fittings
$95.00Pace Offroad #12 engine oil fittings for the Z1 motor. Set comes complete with O-rings and bolts. Anodized grey.RZR Z1 Water Pump Housing Kit
$289.00This Pace designed Z1 Water Pump Housing Kit is machined from Billet Aluminum. It not only increases flow by 20%, but eliminates the 150° elbow in the hose which can trap air and causes cavitation. We have seen a huge improvement in cooling on our cars, and have made this a standard on all of our Z1 swaps. This kit comes complete with everything needed to install.Wild Cat Energy Suspension Sway Bar Bushings
$24.00Wild Cat Energy Suspension Sway Bar Bushings fit Pace Offroad's upgraded Wild Cat Sway Bars. Set of two bushings.RZR Sparco Evo 11 Race Seat Base
$249.00Lightweight Aluminum Seat Base works with the Sparco Evo 11 and Evo 11 US Race Seats. Made to fit Polaris RZR XP 1000 2014-present. Works with both Turbo and Non-Turbo vehicles. No cutting or grinding necessary to install. Reuses OEM seat base latch, see product description.Wild Cat Wheel Adapter Kit
$225.00The Wild Cat Wheel Adapter Kit adapts the Wild Cat wheel bolt pattern to the Polaris bolt pattern so that aftermarket Polaris wheel centers can be used. Kit is complete with all necessary hardware. Kit Includes 2 Billet Aluminum Wheel Adapters.Pace Offroad Z1Turbo Inlet Bell
$238.00Z1 Turbo Inlet Bell for the Z1 stock Turbo. Venchuri style design makes a smooth transition from a 2 1/2" diameter to the old sized 1 7/8" diameter turbo inlet. Incorporates an internal O-ring and pinch clamp that fasten to the turbo inlet. We see from 6-10 hp improvement. Billet Aluminum. Anodized Red.5/8″ Heim Joint
$24.00 – $30.00Heim Joint and Nut. 3 Piece. Teflon Insert. Alloy Steel Housing. Choose 5/8" or 3/4". Replaces the Heim Joint in the following Pace Offroad Kits: Wild Cat Tie Rod Kit Wild Cat High Clearance Rear Radius Rod Kit Wild Cat Straight Rear Radius Rod KitRZR Big Bearing Hub and Spindle Kit
$3,195.00 – $3,275.00Groundbreaking RZR Big Bearing Hub and Spindle Kit is nearly 8 lbs. lighter per corner than stock. Incorporates a 30% larger wheel bearing at a massive 90 mm versus the stock 78 mm. The bearing I.D. is increased from 34 mm t0 44 mm. This larger I.D. gives the hub more support in the bearing which controls the large 30"-34" tires. The spindle has a double shear steering arm which will accecpt a 5/8" or 3/4" heim joint. The hubs are available in 7075 billet aluminum, and have a huge 270 mm chromoly rotor with 4 ARP wheel studs. The spindles have a stainless steel brake caliper adapter that utilizes the stock Polaris caliper bracket to accommodate the large rotor. The billet aluminum rear uprights that bolt to the swing-arms also incorporate the large bearing and are pocketed out to except 5/8" or 3/4" heims on the end of the radius rods. Comes with all necessary hardware.RZR Power Steering Module
$685.00Pace Offroad Razor Power Steering Module will operate the power steering regardless of engine placed in your vehicle. Stand alone mini ECU that needs a 12V power supply to operate the power steering. Incorporates an adjustable correction for the speedometer to the RZR dash in a Z1 Motor. Will operate power steering whether you install an apex engine or any type motorcycle engine.Pace Offroad RZR Race Seat and Base Kit
$1,233.00This Kit combines the Sparco RZR Evo 11 Race Seat with our Pace Offroad Aluminum Seat Base. Made to fit Polaris RZR XP 1000 2014-present. Works with both Turbo and Non-Turbo vehicles. No cutting or grinding necessary to install. Uses OEM seat base latch. Sparco has re-engineered seat it's proportions, which result in a seat that is both taller and slightly wider than than average for taller drivers. The seat belt slots are also re-positioned to sit more level with the driver’s shoulders. Able accommodate a Hans device.STM Driven/Rear Clutch Adjustment Socket
$59.00The STM Rear Clutch Adjustment Socket fits most STM Clutches. Machined 6061 Billet Aluminum. Fits 3/8" ratchett.
-
Sales
-
Wild Cat Straight Rear Radius Rods
$599.00$550.00 -
Wild Cat Complete Upper and Lower A-Arm Kit
$1,898.00$1,694.00 -
Wild Cat Lower A-Arm Kit
$1,199.00$1,125.00
-
-
Wild Cat Wheel Adapter Kit
$225.00
-
Pace Offroad Big Bearing
$164.95
-
Pace Offroad Z1 Engine Oil Fittings
$95.00
-
RZR XP 1000 SKF Transmission Bearing Upgrade Kit
$219.00
-
Shop by Make (Select Make)
